How to use secondary curing oven

The use method of secondary curing oven, oven shell is generally made of thin steel plate, the surface is painted, the studio is made of structural steel plate. Aluminum silicate fiber is filled between the shell and the working room

1. Pay attention to whether the power supply voltage can meet the requirements before use. When using, it is necessary to stop the grounding of the power socket according to the rules.

2. Do not touch the part of the electric appliance on the left side of the box by hand or wipe it with wet cloth or wash it with water when using power. Cut off the power supply during inspection.

3. The power cord should not be wound on metal objects, and should not be set at low temperature or wet to avoid leakage caused by rubber aging.

4. Don't overcrowd the goods in the box, and leave space for convection of atmosphere, so that the moist atmosphere can slow down and escape on the wind top.

5. Check whether the silver contact of the temperature conditioner is hairy or uneven. If it is, use a spinning cloth to sand the contact before using it. Clean it with a clean cloth to make the contact excellent (note that the power must be cut off). Do not impact the metal pipe of indoor temperature conditioner to avoid affecting its flexibility.

6. Do not put inflammables in the dry box without explosion-proof installation.

7. After each use, the power supply shall be cut off locally, and the inside and outside of the box shall be kept clean.